Kreg 1" 1/4" (32mm) Blue Kote Coarse Thread Washer Head Pocket Hole Screws 100pcs SML-C125B
Deep square drive prevents driver jumping out.
Large flat underside of heads stops when it hits bottom of the hole.
Needle sharp point minimises walking.
Thread Type - COARSE thread screws offer advantages in softer materials such as plywood and particle board as their larger thread diameter provides greater holding power.
Head Type - The large bearing surface of the WASHER HEAD is designed to seat securely in the bottom of the pocket providing a consistent clamping force on the joint line.
Blue-Kote Weather Resistant - is the newest generation of rust-resistant screws from Kreg providing up to 400% more weather resistance than zinc-plated screws. Its the best choice for the majority of exterior Pocket-Screw applications and general exterior construction. (NOTE screws are only Blue-Kote if stated).
Length - We suggest the following screw lengths when jointing materials -
1/2" material = 1" screw
5/8" material = 1" screw
3/4" material = 1" 1/4 screw
7/8" material = 1" 1/2 screw
1" material = 1" 1/2 screw
1" 1/8 material = 1" 1/2 screw
1" 1/4 material = 2" screw
1" 3/8 material = 2" screw
1" 1/2 material = 2" 1/2 screw
Please do not hesitate to contact our in-house Sales Team via live webchat for Free of Charge technical advice.
Picture is for advert purposes only and item will be as described.
|Brand||Kreg Tool Company|
|Screw Length||1"1/4" (32mm)|
|Thread Type||Coarse Thread|
|Screws Per Box||100 pieces|
|Appleby Warehouse||Appleby Woodturnings Limited
Swadlincote, DE11 8JL
|27 units available|