- The UK's Tapered Wooden Plug Specialist
- Next Day Delivery Available
- Follow us on instagram
CMT
Appleby Woodturnings are proud suppliers of a wide range of Router Cutters manufactured by the top leading brand CMT Orange Tools.
Our CMT range includes Z=1 Single Flute Carbide, TCT Flush Trim, Bottom Bearing, Z=2 Two Flute 19mm Double Bearing with down shear design, 3 Cutting Edge Z=3 60° Engraver Shank Diameters S= 1/2" and 1/4".
The cutting diameters start from as small as 9.52mm to 19mm, Cut lengths from 11.1mm to 63.5mm with Sharp durable TCT (Tungsten Carbide) cutting edges.
Please do not hesitate to contact our in house, time served experienced sales team for Free Of Charge advice.
CMT 12.7mm Diameter x 50mm Cut Length TCT Straight Router Cutter With 12.7mm Shank
Available
£16.80
£14.00
As low as
£15.79
5.5 x 43mm R/H CMT TCT Hoffmann Dovetail Router Cutter 718.053.11
On request
£21.60
£18.00
As low as
£19.20
CMT Laser Point 60 Deg Carbide Engraver Router Cutter S=1/4" 858.001.11
Available
£28.80
£24.00
As low as
£25.92
CMT Reversible Knife 90 Degree V Groove Engraving Router Cutter S=8mm 665.200.11
Available
£30.00
£25.00
As low as
£27.00
CMT Reversible Tip 1/2" x 50mm Z=1 Carbide Tip Router Cutter 652.628.11
On request
£76.80
£64.00
As low as
£69.12
CMT Reversible Tip 12.7mm x 30mm Single Flute Carbide Tip Router Cutter 652.627.11
Available
£49.20
£41.00
As low as
£45.26
CMT 3/8" x 25.4mm TCT Router Cutter With Bottom Bearing S=1/4"
Available
£18.00
£15.00
As low as
£15.48
19mm Diameter x 50mm Cut length CMT Flush Trim Router Cutter With Double Bearing
Available
£40.80
£34.00
As low as
£38.35
CMT 12.7mm Diameter x 63.5mm Cut Length TCT Straight Router Cutter With 12.7mm Shank
Available
£33.60
£28.00
As low as
£31.58
CMT
Appleby Woodturnings are proud suppliers of a wide range of Router Cutters manufactured by the top leading brand CMT Orange Tools.
Our CMT range includes Z=1 Single Flute Carbide, TCT Flush Trim, Bottom Bearing, Z=2 Two Flute 19mm Double Bearing with down shear design, 3 Cutting Edge Z=3 60° Engraver Shank Diameters S= 1/2" and 1/4".
The cutting diameters start from as small as 9.52mm to 19mm, Cut lengths from 11.1mm to 63.5mm with Sharp durable TCT (Tungsten Carbide) cutting edges.
Please do not hesitate to contact our in house, time served experienced sales team for Free Of Charge advice.