Kreg 32mm (1"1/4") Screws 250pcs Fine Thread Washer Head Pocket Hole Screws SML-F125

250 Kreg 32mm (1"1/4") Fine Thread Washer Head Pocket Hole Screws

SML-F125-250-INT

Features

Deep square drive prevents driver jumping out.

Large flat underside of heads stops when it hits bottom of the hole.

Needle sharp point minimises walking.

Thread Type - FINE thread screws offer advantages in softer materials such as plywood and particle board as their larger thread diameter provides greater holding power.

Head Type - The large bearing surface of the WASHER HEAD is designed to seat securely in the bottom of the pocket providing a consistent clamping force on the joint line.

Length - We suggest the following screw lengths when jointing materials -

1/2" material = 1" screw

5/8" material = 1" screw

3/4" material = 1" 1/4 screw

7/8" material = 1" 1/2 screw

1" material = 1" 1/2 screw

1" 1/8 material = 1" 1/2 screw

1" 1/4 material = 2" screw

1" 3/8 material = 2" screw

1" 1/2 material = 2" 1/2 screw

Please do not hesitate to contact our in-house Sales Team via live webchat for Free of Charge technical advice.

Picture is for illustration purposes only and item will be as described.