Kreg 2" 1/2" (64mm) Blue Kote Coarse Thread Washer Head Pocket Hole Screws 125pcs SML-C250B

Kreg 64mm (2"1/2") Blue Kote Coarse Thread Washer Head Pocket Hole Screws

SML-C250B-125-INT

Features

Deep square drive prevents driver jumping out.

Large flat underside of heads stops when it hits bottom of the hole.

Needle sharp point minimises walking.

Thread Type - COARSE thread screws offer advantages in softer materials such as plywood and particle board as their larger thread diameter provides greater holding power.

Head Type - The large bearing surface of the WASHER HEAD is designed to seat securely in the bottom of the pocket providing a consistent clamping force on the joint line.

Blue-Kote Weather Resistant - is the newest generation of rust-resistant screws from Kreg providing up to 400% more weather resistance than zinc-plated screws. Its the best choice for the majority of exterior Pocket-Screw applications and general exterior construction. (NOTE screws are only Blue-Kote if stated).

Length - We suggest the following screw lengths when jointing materials -

1/2" material = 1" screw

5/8" material = 1" screw

3/4" material = 1" 1/4 screw

7/8" material = 1" 1/2 screw

1" material = 1" 1/2 screw

1" 1/8 material = 1" 1/2 screw

1" 1/4 material = 2" screw

1" 3/8 material = 2" screw

1" 1/2 material = 2" 1/2 screw

Please do not hesitate to contact our in-house Sales Team via live webchat for Free of Charge technical advice.

Picture is for advert purposes only and item will be as described.