Kreg 63mm (2"1/2") 30 pcs Protec Kote #14 Kreg Jig HD Pocket-Hole Screws SML-C2X250

Kreg 63mm (2"1/2") Protec Kote #14 Kreg Jig HD Pocket-Hole Screws

30pcs SML-C2X250

Features

2 ¹/₂" (64mm) long #14 hardened steel Protec-Kote screws

Three weather resistant layers for protection against corrosion and Water resistant

Deep square drive prevents driver jumping out.

Large flat underside of heads stops when it hits bottom of the hole.

Needle sharp point minimises walking.

Thread Type - COARSE thread screws offer advantages in softer materials such as plywood and particle board as their larger thread diameter provides greater holding power.

Head Type - The large bearing surface of the WASHER HEAD is designed to seat securely in the bottom of the pocket providing a consistent clamping force on the joint line.

Length - We suggest the following screw lengths when jointing materials -

1/2" material = 1" screw

5/8" material = 1" screw

3/4" material = 1" 1/4 screw

7/8" material = 1" 1/2 screw

1" material = 1" 1/2 screw

1" 1/8 material = 1" 1/2 screw

1" 1/4 material = 2" screw

1" 3/8 material = 2" screw

1" 1/2 material = 2" 1/2 screw

Designed for use with the Kreg Jig HD

Please do not hesitate to contact our in-house Sales Team via live webchat for Free of Charge technical advice.

Picture is for advert purposes only and item will be as described.