CMT 10mm x 32mm S=10mm CNC Up / Down Compression Spiral Router Z=2+2 R/H 190.100.11

CMT Ø10mm x 32mm cut Length Shank=10mm Carbide CNC Compression Spiral Router Z=2+2 Up/Downcut Right Hand Rotation

CMT Part Code - 190.100.11

 The tool sizes are as follows:

Cut Diameter = 10mm

Shank Diameter = 10mm

Cut Length = 32mm

Total Length = 80mm

Z= 2+2 

Right Hand Rotation

This tool is a Z=2+2  and will provide excellent finish on both the upper and lower side of the workpiece.

Used for cutting, copying, panel-sizing and any routing applications on solid wood, wood composites, plastic materials and laminates. Use a high feed speed on well clamped workpieces. can be used on machining centres, point to point machines, CNC routers and hand held routers equipped with chucks or adapters.

A Special super-micrograin carbide formulation was created to produce and hold a keen cutting edge. The new low-angle spiral is designed specifically to shear wood cleanly and provide efficient chip ejection. The tool runs cooler and the edges last longer.

Our in-house CNC commissioning engineer Jeremy Appleby will be happy to provide Free Of Charge assistance to optimise your applications / parameters.

Picture for advert purposes only and will be exactly as described.