1/2" x 1 1/2" S=1/2" Carbide Down Cut Finishing Spiral Router Cutter
The tool sizes are as follows.
Cut diameter = 1/2" (12.7mm)
Shank diameter = 1/2" (12.7mm)
Cut Length = 1" 1/2" (38.1mm)
Total Length = 88.9mm
Z = 2 (2 Flute)
This tool is a Z=2 (2 Flute) Neg/ R (Negative spiral for best clamping when small workpieces are used and best top layer cutting quality) and is capable of feed rates from 6 to 12m/ min (governed by timber + machine + extraction + item stability).
Used for ripping, template routing and panel sizing of solid wood, plastics and laminates.
We stock a wide range of spiral cutters in Z=1+1, Z=2+2 and Z=3 Turbo in all diameter and cut lengths.
Our in-house CNC commissioning engineer Jeremy Appleby will be happy to provide Free Of Charge assistance to optimise your applications / parameters.
Thanks again for taking the time to look at our products and we hope to see you as a repeat customer in the future.
All prices shown are including the VAT and a full Vat invoice will be sent with every order.
|Cut Length||30 - 39mm|
|Qty of Flutes||2 Wing|
|Chip Flow||Negative (Down Cut)|
|Feed Rate||6 - 12m/min|