CMT 22mm dia x 60mm cut CNC PCD Diamond Spiral Router With Shear Angle Z=3+3 S=25x50mm Right Hand Rotation
The tool sizes are as follows:-
Cut Diameter (D) = 22mm
Shank Diameter (S) = 25 x 50mm
Cut Length (I) = 60mm
Total Length (L) = 120mm
Z = 3+3
40 times longer life than carbide
Used for grooving, jointing, rebating, or general sizing of chipboard and MDF-board either raw laminated or veneered.
These tools are designed to give optimum cutting quality due to the huge shear angles of each tip segment alternating up and down along the cutting edge.
They can be resharpened maximum 6 times which leads to economic efficiency and further cost savings.
We stock a wide range of these cutters in Z=1+1, Z=2+2 and Z=3 Turbo in all diameters and cut lengths.
Our in-house CNC commissioning engineer Jeremy Appleby will be happy to provide Free Of Charge assistance to optimise your applications / parameters.
|Cut Length||60 - 75mm|
|Qty of Flutes||3+3 Wing|
|Chip Flow||Up / Down Compression|
|Feed Rate||Max. 25m/min|