CMT 14mm x 58mm S=14mm CNC Roughing Spiral Router With Chip-Breaker 3 Flute Positive R/H 195.140.11

CMT Ø14mm x 58mm cut Length Shank=14mm Carbide CNC Roughing Spiral Router with chip-breaker Z=3 Positive Right Hand Rotation

CMT Part Code - 195.140.11

 The tool sizes are as follows:

Cut Diameter = 14mm

Shank Diameter = 14mm

Cut Length = 58mm

Total Length = 110mm

Z=3 (3 Flute)

Right Hand Rotation

Chip Flow = Positive/Upward chip ejection.

Chip Breaker Teeth.

This tool is a Z=3 (3 Flute) Pos/ R (positive chip flow extracting the waste upwards towards the extraction hoods) and is capable of feed rates from 12 to 20m/ min (governed by timber + machine + extraction + item stability).

Used for cutting, copying, panel-sizing and any routing applications on solid wood, wood composites, plastic materials and laminates. Use a high feed speed on well clamped workpieces. can be used on machining centres, point to point machines, CNC routers and hand held routers equipped with chucks or adapters.

A Special super-micrograin carbide formulation was created to produce and hold a keen cutting edge. The new low-angle spiral is designed specifically to shear wood cleanly and provide efficient chip ejection. The tool runs cooler and the edges last longer.

Our in-house CNC commissioning engineer Jeremy Appleby will be happy to provide Free Of Charge assistance to optimise your applications / parameters.

Picture for advert purposes only and will be exactly as described.