CMT 16mm x 55mm S=16mm CNC Up / Down Compression Spiral Router Z=2+2 R/H 190.160.11

CMT Ø16mm x 55mm cut Length Shank=16mm Carbide CNC Compression Spiral Router Z=2+2 Up/Downcut Right Hand Rotation

CMT Part Code - 190.160.11

 The tool sizes are as follows:

Cut Diameter = 16mm

Shank Diameter = 16mm

Cut Length = 55mm

Total Length = 110mm

Z =2+2 

Right Hand Rotation

This tool is a Z=2+2 and will provide excellent finish on both the upper and lower side of the workpiece.

Used for cutting, copying, panel-sizing and any routing applications on solid wood, wood composites, plastic materials and laminates. Use a high feed speed on well clamped workpieces. can be used on machining centres, point to point machines, CNC routers and hand held routers equipped with chucks or adapters.

A Special super-micrograin carbide formulation was created to produce and hold a keen cutting edge. The new low-angle spiral is designed specifically to shear wood cleanly and provide efficient chip ejection. The tool runs cooler and the edges last longer.

Our in-house CNC commissioning engineer Jeremy Appleby will be happy to provide Free Of Charge assistance to optimise your applications / parameters.

Picture for advert purposes only and will be exactly as described.