1/4 Inch Japanese Pattern Mortice Chisel Set.
Square Chisel Size - 1/4"
Max Cut Depth - 47mm
Chisel Shank Diameter - 13/16"
Auger Bit Shank Diameter - 3/16"
The Finely ground Chisel is slightly tapered from the tips to by 0.1mm to allow easy removal from the Mortice, a deep waste slot prevents the waste material becoming jammed around the auger.
The auger bit has one spiral flute designed for rapid chip clearance up and out of the single exit slot within one face of the chisel (top to bottom on one side).
These Mortice Chisels and Bits are made from the finest Japanese carbon steels, selected as ideal for these tools.
Please do not hesitate to contact our in house, Woodwork Machinest for Free Of Charge Technical advice.
Thanks for looking and we hope to see you as a repeat customer of the future.
Picture is for advert purposes
All prices include Vat and a full Vat receipt will be sent with every purchase.
|Chisel Cut Size||1/4"|
|Max Cutting Depth||47mm|
|Chisel Shank Diameter||13/16" (20.64mm)|
|Auger Shank Diameter||3/16" (4.76mm)|
|Range Selection (Brand)||No|