Trend Lock Jig LOCK/JIG

Trend Lock Jig LOCK/JIG

Contractor jig with interchangeable templates for use with a plunge router to cut the mortise & face-plate recess for popular door locks.

For most common sash mortises & dead locks, with up to 3 inch deep mortises & a 7/8 inch or 1 inch face-plate.

Deeper mortises can be achieved with a suitable size of auger bit.

Fast, clean & accurate results on doors 34mm to 58mm thick, even in hardwood.

Steel plates & body.

An auger bit and drill is required to complete deep mortises (not incuded).

The jig requires a 1/2- inch plunge router with a 80mm plunge, fitted with a 30mm guide bush with 6mm spigot & 12mm diameter long reach cutter.

A 1/4-inch plunge router can be used for the face plate but will not achieve full depth of mortise.

Door thickness min – 35mm

Door thickness max – 58mm

Face plate template sizes (see image D XOL)

1 – 22.2 x 156mm

2 – 22.2 x 152.5mm

3 – 25.4 x 121mm

4 – 25.4 x 121mm

5 – 25.4 x 145mm

6 – 25.4 x 153mm

7 – 25.4 x 153mm

8 – 25.4 x 165.5mm

9 – 25.4 x 165.5mm

10 – 25.4 x 177mm

11 – Upper = 25 x 57.5mm Lower = 26 x 56.5mm

12 – 25.6 x 162mm

Mortise lock dimensions (see image D XOL)

A – 16 x 72mm

B – 16 x 107mm

C – 19 x 78mm

D – 19 x 109mm

This product includes:

1 x Guide Bush Collar

12 x Face Plate Templates

5 x Mortise Templates

6 x Spacer Fingers

Please do not hesitate to contact our in-house Woodwork machinist by live chat, for free of charge technical advice.

Note picture is for advert purposes only.