CMT Ø16mm x 55mm cut Length Shank=16mm Carbide CNC Roughing Spiral Router with chip-breaker Z=3 Positive Right Hand Rotation
CMT Part Code - 195.160.11
 The tool sizes are as follows:
Cut Diameter = 16mm
Shank Diameter = 16mm
Cut Length = 55mm
Total Length = 110mm
Z=3 (3 Flute)
Right Hand Rotation
Chip Flow = Positive/Upward chip ejection.
Chip Breaker Teeth.
This tool is a Z=3 (3 Flute) Pos/ R (positive chip flow extracting the waste upwards towards the extraction hoods) and is capable of feed rates from 12 to 20m/ min (governed by timber + machine + extraction + item stability).
Used for cutting, copying, panel-sizing and any routing applications on solid wood, wood composites, plastic materials and laminates. Use a high feed speed on well clamped workpieces. can be used on machining centres, point to point machines, CNC routers and hand held routers equipped with chucks or adapters.
A Special super-micrograin carbide formulation was created to produce and hold a keen cutting edge. The new low-angle spiral is designed specifically to shear wood cleanly and provide efficient chip ejection. The tool runs cooler and the edges last longer.
Our in-house CNC commissioning engineer Jeremy Appleby will be happy to provide Free Of Charge assistance to optimise your applications / parameters.
Picture for advert purposes only and will be exactly as described.
Price | £114.00 |
---|---|
Brand | CMT |
Diameter | 16mm |
Cut Length | 50 - 59mm |
Qty of Flutes | 3 Wing |
Chip Flow | Positive (Up Cut) |
Feed Rate | 12 - 20m/min |
Rotation | Right Hand |
Appleby Warehouse | Appleby Woodturnings Limited Swadlincote, DE11 8JL Derbyshire GB 01283212384 |
6 units available |
---|