CMT 12.7mm dia x 34.9mm cut CNC Up / Down Compression Spiral Router Mortising Bit Z=2+2 Right Hand Rotation
Particularly suitable for double sided Veneers, Melamine, Chipboard & MDF material for a clean finish.
This quality CNC manufactured spiral has been made from the best quality grade solid carbide giving increased tool life.
The Tool dimensions are:-
Cut Diameter (D) = 12.7mm (1/2")
Total Cut Length (I) = 34.9mm (1" 3/8")
Up-cut Length (I1) = 5.2mm
Total Bit Length (L) = 88.9mm (3" 1/2")
Shank Diameter (S) = 12.7mm (1/2")
The bottom of the bit is the upcut and the top section is downcut. This compresses the waste material into the centre of the bit which protects the top and bottom layers of the work piece.
Our in-house CNC commissioning engineer Jeremy Appleby will be happy to provide Free Of Charge assistance to optimise your applications / parameters.
We offer a full range of Spiral routers for almost every application. Our standard program ranges in size from 6-25mm with various cut lengths depending on diameter. Most sizes are available in positive and negative, Left Hand and Right Hand rotation, 2 flute or 3 flute designs along with full custom tools on special request.
NB- Pictures shown are for advert purposes only and may not show correct diameter and length. Item will be exactly as described above and supplied in a plastic packaging container for safe transportation.
|Cut Length||30 - 39mm|
|Qty of Flutes||2+2 Wing|
|Chip Flow||Up / Down Compression|
|Feed Rate||6 - 12m/min|