CMT 3/8" (9.52mm) x 1"1/4" (31.75mm) S=1/2" Finishing Spiral Router 2 Flute Negative R/H 192.503.11

CMT Ø3/8"(9.52mm) x 1"1/4" (31.75mm) Cut Length Shank = 1/2" Carbide Down Cut Finishing Spiral CNC Router Cutter

CMT Part Code - 192.503.11

 The tool sizes are as follows.

Cut Diameter = 3/8" - (9.52mm)

Shank Diameter = 1/2" (12.7mm)

Cut Length = 1"1/4" (31.75mm)

Total Length = 82.5mm

Z=2 (2flute)

Chip Flow = Negative/Down cut

 This tool is a Z=2 (2 Flute) Neg/R (Negative spiral will give the best top layer cutting quality and can be used for clamping when small workpieces are used). Capable of feed rates from 5 to 10m/min (governed by timber + machine + extraction + item stability).

Used for Shaping, Grooving and panel sizing of solid wood, plastics and laminates.

Our in-house CNC commissioning engineer Jeremy Appleby will be happy to provide free of charge assistance to optimise your applications/Parameters via Telephone, WhatsApp group chats, Zoom calls and E-mails. Site Visits available on request.

Picture for advert purposes and will be exactly as described.