CMT 14mm x 50mm S=14mm Finishing Spiral Router 3 Flute Neg R/H 194.140.11

CMT Ø14mm x 50mm Cut Length Shank = 14mm Carbide Negative Finishing Spiral CNC Router Cutter

CMT Part Code - 194.140.11

 The tool sizes are as follows.

Cut Diameter = 14mm

Shank Diameter = 14mm

Cut Length = 50mm

Total Length = 110mm

Z=3 (3 Flute)

Right Hand Rotation

Chip Flow = Negative/ Down cut

This tool is a Z=3 (3 Flute) Neg/R (Negative spiral will give the best top layer cutting quality and can be used for clamping when small workpieces are used). Capable of feed rates from 12 to 20m/min (governed by timber + machine + extraction + item stability).

Used for efficient contour cuting, end trimming and panel sizing of solid wood, Wood composites, plastics and laminates at high feed speed. Can be used on machining centres, point to point boring machines, CNC routers and hand held routers equipped with chucks or adapters.

A Special super-micrograin carbide formulation was created to produce and hold a keen cutting edge. The new low-angle spiral is designed specifically to shear wood cleanly and provide efficient chip ejection. The tool runs cooler and the edges last longer.

Our in-house CNC commissioning engineer Jeremy Appleby will be happy to provide free of charge assistance to optimise your applications/Parameters via Telephone, WhatsApp group chats, Zoom calls and E-mails. Site Visits available on request.

Picture for advert purposes and will be exactly as described.