CMT 12mm x 35mm S=12mm CNC Roughing Spiral Router With Chip-Breaker Z=3 Negative L/H 196.120.11

CMT Ø12mm x 35mm cut Length Shank=12mm Carbide CNC Roughing Spiral Router with chip-breaker Z=3 Negative Right Hand Rotation

CMT Part Code - 196.120.11

 The tool sizes are as follows:

Cut Diameter = 12mm

Shank Diameter = 12mm

Cut Length = 35mm

Total Length = 83mm

Z=3 (3 Flute)

Right Hand Rotation

Chip Flow = Negative/Downward chip ejection.

Chip-Breaker teeth

This tool is a Z=3 (3 Flute) Neg/R (Negative spiral will give the best top layer cutting quality and can be used for clamping when small workpieces are used). Capable of feed rates from 12 to 20m/min (governed by timber + machine + extraction + item stability).

Used for cutting, copying, panel-sizing and any routing applications on solid wood, wood composites, plastic materials and laminates. Use a high feed speed on well clamped workpieces. can be used on machining centres, point to point machines, CNC routers and hand held routers equipped with chucks or adapters.

A Special super-micrograin carbide formulation was created to produce and hold a keen cutting edge. The new low-angle spiral is designed specifically to shear wood cleanly and provide efficient chip ejection. The tool runs cooler and the edges last longer.

Our in-house CNC commissioning engineer Jeremy Appleby will be happy to provide Free Of Charge assistance to optimise your applications / parameters.

Picture for advert purposes only and will be exactly as described.