CMT 12.7mm dia x 50.8mm cut CNC Up Cut Compression Spiral Router With Bearing Z=2 R/H 191.127.11B

CMT Ø12.7mm x 50.8mm cut Length Shank=12mm Carbide CNC Compression Double Bearing Spiral Flush Trim Router Bit Z=2 Up-Cut Right Hand Rotation

CMT Part Code - 191.127.11B

 The tool sizes are as follows:

Cut Diameter = 12.7mm

Shank Diameter = 12mm

Cut Length = 50.8mm

Total Length = 114mm

Z= 2 ( 2 Flute) 

Right Hand Rotation

This tool is a Z=2 and will provide excellent finish on both the upper and lower side of the workpiece.

CMT solid carbide spiral flush trim bits are composed of a special super-micrograin formulation increasing hardness with a higher transverse rupture point.

Combined with a spiral cutting angle, CMT solid carbide spiral flush trim bits equipped with a double bearing, allow cabinet makers to shear wood and wood products cleanly, providing more efficient chip ejection than standard flush trim bits

In production settings, this means these bits will run cooler, stay sharper, last longer and increase shop productivity.

Our in-house CNC commissioning engineer Jeremy Appleby will be happy to provide Free Of Charge assistance to optimise your applications / parameters.

Picture for advert purposes only and will be exactly as described.